Sanyo PLC-HF15000L RS232 Expand - Page 55
CF_FILCTL Command, 9.43 CF_FANSPEED Command, 9.44 CF_RCODE Command, 9.45 CF_RSENS Command
![]() |
View all Sanyo PLC-HF15000L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
PLC-HF15000L Expand Serial Command Functional Specifications 8.9.42 CF_FILCTL Command Command "CF_FILCTL_%1" [CR] %1 "SKD Schedule filter cleaning task Details Schedule filter cleaning Acceptable "000" [CR] Response Unacceptable "Error Code" [CR] 8.9.43 CF_FANSPEED Command Command "CF_FANSPEED_%1" [CR] %1 "MAX Select Maximum speed of Fan Control "NOR Select Normal speed of Fan Control Details Switch Fan Control Speed. (Valid only when in the normal Power ON status.) The status set by this command is stored in EEPROM and the setting remains effective after the power is turned to ALL OFF status. Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 8.9.44 CF_RCODE Command Command "CF_RCODE_%1" [CR] "001 Select Code 1 "002 Select Code 2 "003 Select Code 3 "004 Select Code 4 %1 "005 Select Code 5 "006 Select Code 6 "007 Select Code 7 "008 Select Code 8 "UP The same operation as pressing Up key or Left key "DN The same operation as pressing Down key or Right key Details Select Remote Control Code (Valid only when in the normal Power ON status) The status set by this command is stored in EEPROM and the setting remains effective after the power is turned to ALL OFF status. Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 8.9.45 CF_RSENS Command Command "CF_RSENS_%1" [CR] "ALL Select top, front and back receiver of projector "FRONTTOP Select front and top receivers of projector "BACKTOP Select only back and top receivers of projector "FRONTBACK Select only front and back receivers of projector %1 "FRONT Select only front receiver of projector "TOP Select only top receiver of projector "BACK Select only back receiver of projector "UP The same operation as pressing Up key or Left key "DN The same operation as pressing Down key or Right key Details Select location of infrared remote receiver of remote control (Available only in the normal Power ON status) The status set by this command is stored in EEPROM and setting remains effective even after the power is turned to ALL OFF status. Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 55/105
![](/manual_guide/products/sanyo-plchf15000l-rs232-expand-718341b/55.png)