Sanyo PLC-HF15000L RS232 Expand - Page 49
CF_BLENDSTART Command, 9.21 CF_BLENDBLK Command, 9.22 CF_BLENDBLKALL Command
![]() |
View all Sanyo PLC-HF15000L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
PLC-HF15000L Expand Serial Command Functional Specifications 8.9.20 CF_BLENDSTART Command Command "CF_BLENDSTART_%1_%2" [CR] "LEFT Left side %1 "RIGHT Right side "TOP Upper side "BOTTOM Lower side "000"-"1024 Directly specify value of direction of %1 *Value of upper limit changes by choice of %1 %2 Left 000~1024 Right 000~1024 Top 000~540 Bottom 000~540 Details Set the value of Start (Left/Right/Top/Bottom) for direction specified by Edge blending %1. (Available only in the normal Power ON status) The status set by this command is stored in EEPROM and setting remains effective even after the power is turned to ALL OFF status. Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 8.9.21 CF_BLENDBLK Command Command "CF_BLENDBLK_%1_%2" [CR] "R Red %1 "G Green "B Blue %2 "-127" ~ "0127 Directly specify value of color of %1 Details Set value of color specified by Edge blending %1. (Available only in the normal Power ON status) The status set by this command is stored in EEPROM and setting remains effective even after the power is turned to ALL OFF status. Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 8.9.22 CF_BLENDBLKALL Command Command "CF_BLENDBLKALL_%1" [CR] %1 "UP Increment value of Black level(R/G/B) by 1 "DN Decrement value of Black level(R/G/B) by 1 Details Set value of all of Black level of Edge blending. (Available only in the normal Power ON status) The status set by this command is stored in EEPROM and setting remains effective even after the power is turned to ALL OFF status. Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 49/105
![](/manual_guide/products/sanyo-plchf15000l-rs232-expand-718341b/49.png)