Sanyo PLC-HF15000L RS232 Expand - Page 23
CF_COLMNSAV Command, 4.6 CF_COLMNLD Command, 4.7 CF_APCTRL Command, 4.8 CF_COLTEMP Command
![]() |
View all Sanyo PLC-HF15000L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
PLC-HF15000L Expand Serial Command Functional Specifications 8.4.5 CF_COLMNSAV Command Command "CF_COLMNSAV_%1" [CR] %1 "000 - 009 Specify the area to store Details Store current setting status of Color Management to the area specified in %1. (Available only in the normal Power ON status) Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 8.4.6 CF_COLMNLD Command Command "CF_COLMNLD_%1" [CR] %1 "000 - 009 Specify the area to store Details Retrieve Color Management setting status from the area specified in %1. (Available only in the normal Power ON status) Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 8.4.7 CF_APCTRL Command Command "CF_APCTRL_%1" [CR] "L1 Set Auto Picture Control to Level 1. "L2 Set Auto Picture Control to Level 2. %1 "OFF Set Auto Picture Control OFF. "UP The same operation as pressing Up key or Left key "DN The same operation as pressing Down key or Right key Details Set Auto Picture Control (Available only in the normal Power ON status) The value set by this command is not stored in the projector's memory. Therefore, when the power is turned to ALL OFF status, the value returns to the original setting. (It is stored in Suspend mode.) Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 8.4.8 CF_COLTEMP Command Command "CF_COLTEMP_%1" [CR] %1 "000" - "003" Details Set Color Temperature (Available only in the normal Power ON status) The value set by this command is not stored in the projector's memory. Therefore, when the power is turned to ALL OFF status, the value returns to the original setting. (It is stored in Suspend mode.) Acceptable Response Unacceptable "000" [CR] "Error Code" [CR] 23/105
![](/manual_guide/products/sanyo-plchf15000l-rs232-expand-718341b/23.png)