Sanyo PLC-HF15000L RS232 Expand - Page 56
CF_P-MANE Command, 9.47 CF_P-MANETIME Command, 9.48 CF_ON-STA Command, 9.49 CF_KEYDIS Command
View all Sanyo PLC-HF15000L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
PLC-HF15000L Expand Serial Command Functional Specifications 8.9.46 CF_P-MANE Command Command "CF_P-MANE_%1" [CR] "OFF Set Power Management to Off "READY Set Power Management to Ready %1 "SHUTDOWN Set Power Management to Shut Down mode "UP The same operation as pressing Up key or Left key "DN The same operation as pressing Down key or Right key Details Set/Cancel Power Management. (Valid only when in the normal Power ON status.) The status set by this command is stored in EEPROM and the setting remains effective after the power is turned to ALL OFF status. Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 8.9.47 CF_P-MANETIME Command Command "CF_P-MANETIME_%1" [CR] "01" - "30 Directly specify setting time by the minute %1 "UP Increment value by 1 (Switched in 01→02→ --- → 30 → 01 order) "DN Decrement value by 1 (Switched in 30→29→ --- → 01 → 30 order) Details Set time of Power Management time (Available only in the normal Power ON status). The status set by this command is stored in EEPROM and setting remains effective even after the power is turned to ALL OFF status. Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 8.9.48 CF_ON-STA Command Command "CF_ON-STA_%1" [CR] "ON Set Direct on active. "OFF Set Direct on inactive. %1 "UP The same operation as pressing Up key or Left key "DN The same operation as pressing Down key or Right key *"UP" and "DN" are exactly same operation. Details Set/Cancel Direct Power On (Only valid when it is in the normal Power ON status) The status set by this command is stored in EEPROM and the setting remains effective after the power is turned to ALL OFF status. Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 8.9.49 CF_KEYDIS Command Command "CF_KEYDIS_%1" [CR] "NONE RC & KEY are valid %1 "RC RC is invalid "KEY KEY is invalid Details Set the limitation of RC/KEY use (Valid only when in the normal Power ON status) Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 56/105