Sanyo PLC-HF15000L RS232 Expand - Page 17

PLC-HF15000L Expand Serial Command Functional Specifications 6 Status Read Command Table 6.1 Image Status Read Command Table Status read command CR_CONT [CR] CR_BRIGHT [CR] CR_COLOR [CR] CR_TINT [CR] CR_APCTRL CR_COLTEMP CR_WBAL-R [CR] CR_WBAL-G [CR] CR_WBAL-B [CR] CR_OFFSET-R [CR] CR_OFFSET-G [CR] CR_OFFSET-B [CR] CR_SHARP [CR] CR_GAMMA [CR] CR_NZRED [CR] CR_PROGV [CR] CR_IMAGE [CR] CR_IMGGMD [CR] CR_ADVCOL [CR] Item Get value of Contrast Get value of Brightness Get value of Color Get value of Tint Get setting status of Auto Picture Control Get value of Color temperature Get Red value of White Balance Get Green value of White Balance Get Blue value of White Balance Get Offset Red Get Offset Green Get Offset Blue Get value of Sharpness Get value of Gamma Get setting status of Noise reduction Get setting status of Progressive scan Get Selected Image status Get setting value of Image Gamma Get setting status of Advanced color 6.2 PC Status Read Command Table Status read command Item CR_FSYNC [CR] Get setting value of Fine Sync CR_TDOTS [CR] Get setting value of Total Dots CR_CLAMP [CR] Get setting value of Clamp CR_H-POS [CR] Get setting value of Horizontal Position CR_V-POS [CR] Get setting value of Vertical Position CR_DDOTS [CR] Get setting value of Display Dots CR_DLINE [CR] Get setting value of Display Line CR_ORGMODE [CR] Get the original signal of the mode adjusted in PC Adj. CR_PCSTORE [CR] Get Free or Stored status for PC Adj. Mode 1-10 6.3 Video Status Read Command Table Status read command CR_SERSYS [CR] Item Get currently selected signal. In Auto mode, it returns a result by Auto detection. 6.4 Input Status Read Command Table Status read command Item CR_INPUT [CR] Get selected Input CR_SOURCE [CR] Get selected Source CR_SYSTEM [CR] Get selected System in Video Input mode CR_SYSLIST[CR] Get possible system list CR-MODELIST[CR] Get possible mode list 17/105