Sanyo PLC-HF15000L RS232 Expand - Page 41

Lamp Command, 8.1 CF_LAMPMODE Command, 8.2 CF_ LAMPCONSTTAR Command, 8.3 CF_AUTOLAMPCONTRL Command

Get Sanyo PLC-HF15000L - 15000 Lumens PDF manuals and user guides View all Sanyo PLC-HF15000L manuals
Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

PLC-HF15000L Expand Serial Command Functional Specifications 8.8 Lamp Command 8.8.1 CF_LAMPMODE Command Command "CF_LAMPMODE_%1" [CR] "4LAMP Set lamp mode to 4-lamps "3LAMPAUTO" ---- Set lamp mode to 3-lamps and automatically and preferentially use lamps with shorter cumulated lighting time. "3LAMP123" -------- Set lamp mode to 3-lamps (LAMP1, 2 and 3) "3LAMP"234" -------- Set lamp mode to 3-lamps (LAMP2, 3 and 3) "3LAMP134" -------- Set lamp mode to 3-lamps (LAMP1, 3 and 4) %1 "3LAMP124" -------- Set lamp mode to 3-lamps (LAMP1, 2 and 4) "2LAMPAUTO" ---- Set lamp mode to 2-lamps and automatically and preferentially use lamps with shorter cumulated lighting time. "2LAMP23" -------- Set lamp mode to 2-lamps (LAMP2 and 3) "2LAMP14" -------- Set lamp mode to 2-lamps (LAMP1 and 4) "CONSTANT" ------ Set lamp mode to Constant mode, and automatically switch between 4-Lamps mode and 2-Lamps mode, and/or modulate the light to keep the target brightness Details Select Lamp mode. (Valid only when in the normal Power ON status.) The value set by this command is stored in EEPROM and the setting remains effective after the power is turned to ALL OFF status. Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 8.8.2 CF_ LAMPCONSTTAR Command Command "CF_LAMPCONSTTAR_%1" [CR] %1 "0000" - "1024" Details Set Target value for Constant mode of Lamp mode. (Valid only when in the normal Power ON status.) The value set by this command is stored in EEPROM and the setting remains effective after the power is turned to ALL OFF status. Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 8.8.3 CF_AUTOLAMPCONTRL Command Command "CF_AUTOLAMPCONTRL_%1" [CR] "NORMAL Set Lamp status to Normal mode %1 "ECO1 Set Lamp status to Eco1 mode "ECO2 Set Lamp status to Eco2 mode "AUTO Set Lamp status to Auto mode Details Select Lamp control mode. (Valid only when in the normal Power ON status.) The value set by this command is stored in EEPROM and the setting remains effective after the power is turned to ALL OFF status. Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 41/105

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
PLC-HF15000L
Expand Serial Command Functional Specifications
41/105
8.8 Lamp Command
8.8.1 CF_LAMPMODE Command
Command
“CF_LAMPMODE_%1” [CR]
%1
“4LAMP” ------------- Set lamp mode to 4-lamps
“3LAMPAUTO” ---- Set lamp mode to 3-lamps and automatically and preferentially
use lamps with shorter cumulated lighting time.
“3LAMP123” -------- Set lamp mode to 3-lamps (LAMP1, 2 and 3)
“3LAMP”234” -------- Set lamp mode to 3-lamps (LAMP2, 3 and 3)
“3LAMP134” -------- Set lamp mode to 3-lamps (LAMP1, 3 and 4)
“3LAMP124” -------- Set lamp mode to 3-lamps (LAMP1, 2 and 4)
“2LAMPAUTO” ---- Set lamp mode to 2-lamps and automatically and preferentially
use lamps with shorter cumulated lighting time.
“2LAMP23” -------- Set lamp mode to 2-lamps (LAMP2 and 3)
“2LAMP14” -------- Set lamp mode to 2-lamps (LAMP1 and 4)
“CONSTANT” ------ Set lamp mode to Constant mode, and automatically switch
between 4-Lamps mode and 2-Lamps mode, and/or modulate
the light to keep the target brightness
Details
Select Lamp mode. (Valid only when in the normal Power ON status.)
The value set by this command is stored in EEPROM and the setting remains
effective after the power is turned to ALL OFF status.
Acceptable
“000” [CR]
Response
Unacceptable
“Error Code” [CR]
8.8.2 CF_ LAMPCONSTTAR Command
Command
“CF_LAMPCONSTTAR_%1” [CR]
%1
“0000” - “1024”
Details
Set Target value for Constant mode of Lamp mode.
(Valid only when in the normal Power ON status.)
The value set by this command is stored in EEPROM and the setting remains
effective after the power is turned to ALL OFF status.
Acceptable
“000” [CR]
Response
Unacceptable
“Error Code” [CR]
8.8.3 CF_AUTOLAMPCONTRL Command
Command
“CF_AUTOLAMPCONTRL_%1” [CR]
%1
“NORMAL” ------------------------ Set Lamp status to Normal mode
“ECO1” ------------------------------- Set Lamp status to Eco1 mode
“ECO2” ------------------------------- Set Lamp status to Eco2 mode
“AUTO” ----------------------------- Set Lamp status to Auto mode
Details
Select Lamp control mode. (Valid only when in the normal Power ON status.)
The value set by this command is stored in EEPROM and the setting remains
effective after the power is turned to ALL OFF status.
Acceptable
“000” [CR]
Response
Unacceptable
“Error Code” [CR]