Sanyo PLC-HF15000L RS232 Expand - Page 24

CF_WBAL- Command, 4.10 CF_OFFSET- Command, 4.11 CF_SHARP Command

Get Sanyo PLC-HF15000L - 15000 Lumens PDF manuals and user guides View all Sanyo PLC-HF15000L manuals
Add to My Manuals
Save this manual to your list of manuals

Page 24 highlights

PLC-HF15000L Expand Serial Command Functional Specifications 8.4.9 CF_WBAL- Command Command "CF_WBAL-%1_%2" [CR] "R RED %1 "G GREEN "B BLUE "000-063"------ Directly specify value of Color selected in %1 of White Balance. %2 "UP"------ Increment setting value of Color specified in %1 of White Balance by 1 "DN"----- Decrement setting value of Color specified in %1 of White Balance by 1 Details Set value of Color specified in %1 of White Balance (Available only in the normal Power ON status) The value set by this command is not stored in the projector's memory. Therefore, when the power is turned to ALL OFF status, the value returns to the original setting. (It is stored in Suspend mode.) Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 8.4.10 CF_OFFSET- Command Command "CF_OFFSET-%1_%2" [CR] "R" --------- RED %1 "G" --------- GREEN "B" --------- BLUE "000-063"------ Directly specify value of Color selected in %1 of Offset. %2 "UP Increment setting value of Color specified in %1 of Offset by 1 "DN Decrement setting value of Color specified in %1 of Offset by 1 Details Set value of Color specified in %1 of Offset (Available only in the normal Power ON status) The value set by this command will not be stored in the projector's memory. Therefore, when the power is turned to ALL OFF status, the value returns to the original setting. (It is stored in Suspend mode.) Acceptable Response "000" [CR] Unacceptable "Error Code"[CR] 8.4.11 CF_SHARP Command Command "CF_SHARP_%1" [CR] "000-031 Directly specify setting value of Sharpness. %1 "UP Increment setting value of Sharpness by 1 "DN Decrement setting value of Sharpness by 1 Details Set user controlled value of Sharpness. (Available only in the normal Power ON status) The value set by this command is not stored in the projector's memory. Therefore, when the power is turned to ALL OFF status, the value returns to the original setting. (It is stored in Suspend mode.) Acceptable Response Unacceptable "000" [CR] "Error Code" [CR] 24/105

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
PLC-HF15000L
Expand Serial Command Functional Specifications
24/105
8.4.9 CF_WBAL- Command
Command
“CF_WBAL-%1_%2” [CR]
%1
“R” ------------- RED
“G” ------------ GREEN
“B” ------------- BLUE
%2
“000-063”------ Directly specify value of Color selected in %1 of White Balance.
“UP”------ Increment setting value of Color specified in %1 of White Balance by 1
“DN”----- Decrement setting value of Color specified in %1 of White Balance by 1
Details
Set value of Color specified in %1 of White Balance (Available only in the normal
Power ON status)
The value set by this command is not stored in the projector’s memory. Therefore,
when the power is turned to ALL OFF status, the value returns to the original
setting. (It is stored in Suspend mode.)
Acceptable
“000” [CR]
Response
Unacceptable
“Error Code” [CR]
8.4.10 CF_OFFSET- Command
Command
“CF_OFFSET-%1_%2” [CR]
%1
“R” --------- RED
“G” --------- GREEN
“B” --------- BLUE
%2
“000-063”------ Directly specify value of Color selected in %1 of Offset.
“UP”------------ Increment setting value of Color specified in %1 of Offset by 1
“DN”------------ Decrement setting value of Color specified in %1 of Offset by 1
Details
Set value of Color specified in %1 of Offset (Available only in the normal Power ON
status)
The value set by this command will not be stored in the projector’s memory.
Therefore, when the power is turned to ALL OFF status, the value returns to the
original setting. (It is stored in Suspend mode.)
Acceptable
“000” [CR]
Response
Unacceptable
“Error Code”[CR]
8.4.11 CF_SHARP Command
Command
“CF_SHARP_%1” [CR]
%1
“000-031” -------------- Directly specify setting value of Sharpness.
“UP”--------------------- Increment setting value of Sharpness by 1
“DN”--------------------- Decrement setting value of Sharpness by 1
Details
Set user controlled value of Sharpness. (Available only in the normal Power ON
status)
The value set by this command is not stored in the projector’s memory. Therefore,
when the power is turned to ALL OFF status, the value returns to the original
setting. (It is stored in Suspend mode.)
Acceptable
“000” [CR]
Response
Unacceptable
“Error Code” [CR]