Sanyo PLC-HF15000L RS232 Expand - Page 38
CF_CEIL Command, 7.11 CF_REAR Command, 7.12 CF_VSCALE Command
![]() |
View all Sanyo PLC-HF15000L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
PLC-HF15000L Expand Serial Command Functional Specifications 8.7.10 CF_CEIL Command Command "CF_CEIL_%1" [CR] %1 "ON Set Ceiling to ON "OFF Set Ceiling to OFF Details Set/Cancel Ceiling. (Valid only when in the normal Power ON status.) When Ceiling is set to ON, image is left/right as well as top/bottom reversed. The status set by this command is stored in EEPROM and the setting remains effective after the power is turned to ALL OFF status. Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 8.7.11 CF_REAR Command Command "CF_REAR_%1" [CR] %1 "ON Set Rear to ON "OFF Set Rear to OFF Details Set/Cancel Rear. (Valid only when in the normal Power ON status.) When Rear is set to ON, image is left/right reversed. The status set by this command is stored in EEPROM and the setting remains effective after the power is turned to ALL OFF status. Acceptable Response Unacceptable "000" [CR] "Error Code" [CR] 8.7.12 CF_VSCALE Command Command "CF_VSCALE_%1" [CR] "035 35 "031 31 "001 1 "000 0 %1 " 01 1 Details Response " 31 31 " 32 32 "UP Increment setting value of Vscale by 1 "DN Decrement setting value of Vscale by 1 Set Vscale (Available only in the normal Power ON status) *When selected screen mode is a setting except Custom, return "101" [CR] and the command is not executed. * When input is no signal, return "101" [CR] and the command is not executed. Acceptable "000" [CR] Unacceptable "Error Code" [CR] 38/105
![](/manual_guide/products/sanyo-plchf15000l-rs232-expand-718341b/38.png)