Sanyo PLC-HF15000L RS232 Expand - Page 64
Status Read Command, 1 Format, 2 Transfer Example, 3 Operation condition
View all Sanyo PLC-HF15000L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
PLC-HF15000L Expand Serial Command Functional Specifications 9 Status Read Command 9.1 Format 1) PC issues a command in the format below: "CR_Command" [CR] Command: String 2) When the projector receives the applicable command, it returns the required information as a data string. "000_" %1 [CR] %1: required Information (a data string. Refer to [Basic Status Read Command Table]) 3) When the received data cannot be decoded, the projector returns "?" [CR] 9.2 Transfer Example Getting total dots of the projector by Expand Serial Commands PC → PJ: "CR_TDOTS" [CR] PC ← PJ: "000_1344" [CR] 9.3 Operation condition Basically it should be always operated. 64/105
PLC-HF15000L
Expand Serial Command Functional Specifications
64/105
9
�
Status Read Command
9.1 Format
1)
PC issues a command in the format below:
“CR_Command” [CR]
Command: String
2)
When the projector receives the applicable command, it returns the required information
as a data string.
“000_” %1 [CR]
%1: required Information (a data string. Refer to [Basic Status Read Command Table])
3)
When the received data cannot be decoded, the projector returns
“?” [CR]
9.2 Transfer Example
Getting total dots of the projector by Expand Serial Commands
PC
→
PJ: “CR_TDOTS” [CR]
PC
←
PJ: “000_1344” [CR]
9.3 Operation condition
Basically it should be always operated.