Sanyo PLC-HF15000L RS232 Expand - Page 48
CF_PIPMODEFREE Command, 9.17 CF_PIPRST Command, 9.18 CF_EDGEBLENDING Command, 9.19 CF_BLEND
![]() |
View all Sanyo PLC-HF15000L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
PLC-HF15000L Expand Serial Command Functional Specifications 8.9.16 CF_PIPMODEFREE Command Command "CF_PIPMODEFREE_%1" [CR] "USER1 Set User1 to Free status "USER 2 Set User2 to Free status %1 "USER 3 Set User3 to Free status "USER 4 Set User4 to Free status "USER 5 Set User5 to Free status Details Delete the data registered in Custom User1-5 and returns it to Free status. This command operates the same way as resetting to User1-5 in "Picture in Picture" Menu. (Available only in the normal Power ON status) *When there is only one user mode of stored state, return "101" [CR] Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 8.9.17 CF_PIPRST Command Command "CF_PIPRST_%1" [CR] %1 "RST Reset current setting status Details Reset current setting status of "Picture in Picture". (Available only in the normal Power ON status) Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 8.9.18 CF_EDGEBLENDING Command Command "CF_EDGEBLENDING_%1" [CR] %1 "ON Set Edge blending to On "OFF Set Edge blending to Off Details Set Edge blending.(Available only in the normal Power ON status) The status set by this command is stored in EEPROM and setting remains effective even after the power is turned to ALL OFF status. Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 8.9.19 CF_BLEND Command Command "CF_BLEND_%1_%2" [CR] "LEFT Left side %1 "RIGHT Right side "TOP Upper side "BOTTOM Lower side "000"-"1024 Directly specify value of direction of %1 *Value of upper limit changes by choice of %1 %2 Left 000~1024 Right 000~1024 Top 000~540 Bottom 000~540 Details Set the value of Width for direction specified by Edge blending %1. (Available only in the normal Power ON status) The status set by this command is stored in EEPROM and setting remains effective even after the power is turned to ALL OFF status. Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 48/105
![](/manual_guide/products/sanyo-plchf15000l-rs232-expand-718341b/48.png)