Sharp FO IS125N FO-IS125N Operation Manual - Page 101

Call Restriction 5. Security Functions Storing/editing destinations with a permission setting The following procedure can be used to specify the permission setting at the same time as you store a new fax number or e-mail address. This saves you the trouble of first storing the destination using the regular procedure and then using the permission procedure to permit the destination to be used. In addition, you can use this procedure to cancel the permision setting of a previously stored destination. 1 Press SECURE , then until [CALL RESTRICTION] appears. • If the display shows [ENTER PASSWORD] after you press SECURE START , enter the administrator code and press . 2 Press , then appears. until [SET PERMITTED #] / [1=NEW, 2= SEARCH] 3 Press (NEW). 4 To store a new fax number, follow steps 2 through 7 of the storing procedure that starts on page 60. To store a new e-mail address, follow steps 2 through 8 of the storing procedure that starts on page 39. To cancel the permission setting of a previously stored fax number (or otherwise edit the number), follow steps 2 through 7 of the editing procedure that starts on page 62. To cancel the permission setting of a previously stored e-mail address (or otherwise edit the address), follow steps 2 through 8 of the editing procedure that starts on page 40. 5 The display will show [PERMIT TO SEND?]. Press (YES) to permit the destination to be used, or (NO) to cancel permission. 6 Complete the remaining steps of the storing or editing procedure. 99