Sharp FO IS125N FO-IS125N Operation Manual - Page 66
Using an auto-dial number to send a fax, Rapid Key Dialing
![]() |
UPC - 074000034372
View all Sharp FO IS125N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Sending a Fax by Automatic Dialing Using an auto-dial number to send a fax 1 Load the document(s). • If desired, press RESOLUTION to set the resolution and/or contrast. 2 Select the fax number using one of the methods below: • Rapid Key Dialing: If the number is stored in a Rapid Key, press the Rapid Key. • Speed Dialing: If the number is stored in a Speed Dial number, press SPEED DIAL and enter the Speed Dial number with the number keys (the number must be 3 digits: enter "001" for Speed Dial 1, "010" for Speed Dial 10, etc.). Make sure the correct destination appears in the display (if not, press STOP ), and then press . START • Search Dialing: Press or until the name or number of the other START party appears in the display, and press . 3 Scanning, dialing, and transmission will take place automatically. • To cancel transmission, press STOP . • If the transmission is completed successfully, the machine will beep once. • If an error occurs, the machine will beep three times and print a Transaction Report to inform you of the problem (see page 143). 64
![](/manual_guide/products/sharp-fo-is125n-fois125n-operation-manual-63a2426/66.png)