Sharp FO IS125N FO-IS125N Operation Manual - Page 53
the display shows [PRESS START TO SCAN]., to begin transmission.
![]() |
UPC - 074000034372
View all Sharp FO IS125N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Scan to Folder / FTP 2. Network Scanning 2 Select the destination using one of the following methods: • If the destination has been stored in a Rapid Key, press the Rapid Key. • SPEED DIAL If the destination has been stored in a Speed Dial number, press and enter the Speed Dial number. • To search for the destination, press SCAN TO FOLDER , press or START until the name or address appears, and press . 3 If you need to specify either of the file options, press and go to Step 4 below. (Note that settings selected here are temporary. To make permanent changes, change the settings in the Web page as explained on pages 49 and 50.) If you do not wish to change the file options, go directly to Step 6. 4 Press or until the desired option appears, and then make a selection for the option as explained below. • FILE FORMAT: Select the format of the scanned image file. Press for TIFF or for PDF. • FILE NAME: To use an automatically generated file name for the scanned file, press (AUTO). To assign a custom name, press (CUSTOM), enter the desired name with the letter keys (max. 40 characters), and press START . 5 When you have finished configuring the file options, press or until the display shows [PRESS START TO SCAN]. 6 START Press to begin transmission. 51
![](/manual_guide/products/sharp-fo-is125n-fois125n-operation-manual-63a2426/53.png)