Sharp FO IS125N FO-IS125N Operation Manual - Page 67
Sending a fax by Direct Keypad Dialing, Making a voice call with an auto-dial number
![]() |
UPC - 074000034372
View all Sharp FO IS125N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Sending a Fax by Automatic Dialing 3. Sending Faxes Making a voice call with an auto-dial number Rapid Key Dialing: Lift the handset and press the Rapid Key. SPEED DIAL Speed Dialing: Lift the handset, press , and enter the Speed Dial number with the number keys (the number must be 3 digits: enter "001" for Speed Dial 1, "010" for Speed Dial 10, etc.). Search Dialing: Press or until the name or number of the other party appears, and lift the handset. (You can also lift the handset first, search for the number, and then press START .) Sending a fax by Direct Keypad Dialing Use this method to dial a full fax number without using the handset. 1 Load the document(s). • If desired, press RESOLUTION to set the resolution and/or contrast. 2 Enter the number of the receiving machine with the number keys. • If a pause is required between any of the digits to access a special service REDIAL or an outside line, press . The pause appears as a hyphen (two seconds per pause). Several pauses can be entered in a row. 3 START Check the display. If the number shown is correct, press . • If the number is not correct, press STOP to clear the incorrect digits, and then re-enter the correct digit(s). 65
![](/manual_guide/products/sharp-fo-is125n-fois125n-operation-manual-63a2426/67.png)