Sharp FO IS125N FO-IS125N Operation Manual - Page 49
Initializing the network settings, Display: [INITIALIZE SETTINGS] / [IF OK, PRESS START]
UPC - 074000034372
View all Sharp FO IS125N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
2. Network Scanning Network Settings • If you make a mistake, press enter the correct number. to move the cursor to the mistake and 6 When finished entering the number, press . START 7 The next setting will appear in the display. Repeat Steps 4 through 6 to configure the next setting, or press STOP to exit. Initializing the network settings If you need to return the network settings to their initial state, follow the steps below. ♦ Initializing the settings enables DHCP and clears the IP address and related settings. 1 FUNCTION Press , then until [NETWORK SETTING] appears. 2 Press , then until [INITIALIZE SETTINGS] appears. 3 START Press . Display: [INITIALIZE SETTINGS] / [IF OK, PRESS START] 4 START Press . 47
Network Settings
47
2. Network
Scanning
•
If you make a mistake, press
to move the cursor to the mistake and
enter the correct number.
6
When finished entering the number, press
.
7
The next setting will appear in the display. Repeat Steps 4 through 6 to
configure the next setting, or press
to exit.
START
STOP
Initializing the network settings
If you need to return the network settings to their initial state, follow the steps
below.
♦
Initializing the settings enables DHCP and clears the IP address and
related settings.
1
Press
, then
until [NETWORK SETTING] appears.
2
Press
, then
until [INITIALIZE SETTINGS] appears.
3
Press
.
Display: [INITIALIZE SETTINGS] / [IF OK, PRESS START]
4
Press
.
FUNCTION
START
START