Sharp FO IS125N FO-IS125N Operation Manual - Page 48
Network Settings
![]() |
UPC - 074000034372
View all Sharp FO IS125N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Network Settings Network Settings If your network requires that you assign a static (permanent) IP address to the machine, follow the steps below to disable DHCP (automatic IP address assigment) and configure the network settings. ♦ Consult your network administrator for the information that must be entered. After DHCP is disabled, the settings that must be configured appear in the following order (these settings only appear when DHCP is set to NO): IP ADDRESS SUBNET MASK DEFAULT GATEWAY DNS (PRIMARY) DNS (SECONDARY) 1 FUNCTION Press , then until [NETWORK SETTING] appears. 2 Press . [DHCP] will appear. 3 Press for NO (the machine will not obtain an IP address automatically). • [IP ADDRESS] will appear. (If you wish to configure a different setting, press or .) 4 Press . 5 Press the number keys to enter the required number. • Three digits must be entered in each segment of the number (the segments are separated by periods). If a segment does not have 3 digits, enter zeros as needed. Example: IP address = 192.168.1.2 You must enter: 192.168.001.002 46
![](/manual_guide/products/sharp-fo-is125n-fois125n-operation-manual-63a2426/48.png)