Sharp FO IS125N FO-IS125N Operation Manual - Page 159
Copying problems - toners
![]() |
UPC - 074000034372
View all Sharp FO IS125N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 159 highlights
Problems and Solutions No reception occurs when • Make sure the transmitting machine is in automatic polling is attempted. reception mode. • If the transmitting machine has polling security, make sure that your fax number has been entered both in your machine (see page 24) and in the transmitting machine. Copying problems Problem Solution The quality of copies is poor and/or dark vertical lines appear. • Any dirt or material on the scanning glass will cause spots to appear on copies and transmitted faxes. Clean the scanning glass as explained on page 144. The paper comes out blank when you make a copy. • Make sure the original is placed face down in the feeder. The size of the printed document image does not match the size of the paper. • Make sure that the paper size setting is correct (see page 140). • Make sure an appropriate enlarge/reduce setting is selected (see page 109). A copy is faint. • Adjust the contrast setting (see page 55). • If other printed output is also faint, the toner cartridge may need replacement (see page 148). 12. Troubleshooting 157
![](/manual_guide/products/sharp-fo-is125n-fois125n-operation-manual-63a2426/159.png)