Sharp FO IS125N FO-IS125N Operation Manual - Page 162
Fax Rx In Memory, Out Of Paper - toner for
UPC - 074000034372
View all Sharp FO IS125N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 162 highlights
Messages and Signals FAX RX IN MEMORY HEATER HIGH / HEATER LOW / LASER ERROR LINE ERROR M: xx% M#xxx MEMORY FULL OUT OF PAPER / PRINT CANCELED PAPER JAMMED A fax has been received in memory because the toner cartridge needs replacement, you have run out of printing paper, or the paper is jammed. Another message will alternate with this message to indicate the problem. The fax will print out automatically when the problem is fixed. If this message appears, unplug the power cord and then plug it back in. If the message still appears, call for service. Transmission or reception was not successful. Press STOP to clear the message and then try again. If the error persists, see Line error on page 154. This shows the percentage of the machine's memory currently in use. This appears while a document is being scanned and indicates the memory number assigned to the job (the number appears in "xxx"). This number appears when you check or cancel a job with the INFO key (page 67). If faxes have been received to memory because printing is not possible, resolve the problem so that printing can continue (see Reception to Memory on page 70). If faxes are being held in memory because the Secure Fax function has been activated, print the faxes as explained on page 85. If you are attempting to broadcast or transmit from memory, see If the memory becomes full on page 112. If you are copying, see If MEMORY FULL appears on page 110. Printing was canceled because the tray is out of paper. Press any key to clear the message, add paper, and repeat the print job. The printing paper is jammed. See page 165. 160