Sharp FO IS125N FO-IS125N Operation Manual - Page 74

Administrator Code Administrator Code The security functions can only be set up and changed by the administrator of the machine. To access the security functions, the administrator must enter the administrator code. The administrator code has been set to "00000000" at the factory. It is strongly recommended that the administrator of the machine change the administrator code to a code that only he or she knows. To change the administrator code, follow the steps below. 1 Hold down SECURE until [ADMIN CODE SETUP] / [PRESS START KEY] appears in the display. 2 START Press . Display: [ENTER OLD CODE] 3 Enter the current administrator code. • If you are setting the code for the first time, enter 00000000. • To clear a mistake, press DEL . 4 START Press . 5 Enter the new code that you wish to use (any number from 5 to 8 digits). 6 START Press . The code will be printed out. • Take care not to lose the print-out or forget the code. In the event that you forget the code and have kept no record, contact your dealer. • If [USE ANOTHER CODE] appears, the code you entered is already being used for one of the other security functions. Enter a different code. 72