Sharp FO IS125N FO-IS125N Operation Manual - Page 33
IP ADDRESS/DHCP: FAIL, Network, Scanning
![]() |
UPC - 074000034372
View all Sharp FO IS125N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
2. Network Scanning Setting up Network Scanning If the machine is unable to communicate... ♦ Check the Ethernet cable. Are the connections secure? Are you using straight-through (not crossover) cable for 10Base-T/100Base-TX? ♦ There may be a problem in the router or other device to which the machine is connected. Try removing and then restoring the power to the router (see the manual for the router). ♦ If [IP ADDRESS/DHCP: FAIL] appears, remove and then reinsert the Ethernet cable plug, and then check the IP address again. If the same message appears, check the device that acts as the DHCP server on your network (try removing and restoring the power). If your router is your DHCP server, make sure that DHCP is enabled in the router settings. If your network does not have a DHCP server, set a static IP address as explained on page 46. ♦ If a static IP address has been set, make sure that the network settings (page 46) are correct . 31
![](/manual_guide/products/sharp-fo-is125n-fois125n-operation-manual-63a2426/33.png)