Sharp FO IS125N FO-IS125N Operation Manual - Page 163
CABLE DISCONNECTED, Trouble, shooting
![]() |
UPC - 074000034372
View all Sharp FO IS125N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 163 highlights
Messages and Signals 12. Troubleshooting PAPER MISMATCHED / CHECK PAPER SIZE The paper size setting (page 140) does not match the size of paper loaded in the tray. Change the paper size setting or the size of paper loaded in the tray (for a print job from a computer, only the size of paper loaded in the tray can be changed; not the paper size setting). When START finished, press . RCVD FAX TRANSFER This appears when the Fax to E-mail/Folder function is activated (page 120). RECALLING This appears if you attempt to send a fax by auto dialing and the line is busy or the receiving fax machine does not answer. Your machine will automatically reattempt the call. (See Automatic redialing on page 66.) RECEIVED SECURE FAX A received fax is being held in memory because the Secure Fax function has been activated. Enter your secure code to print the fax (see page 85). SERVER ERROR A Scan to E-mail transmission was not successful because the machine could not connect to your mail server or there was no response from the mail server. Make sure the SMTP server setting is correct (p. 32). If you have configured "POP before SMTP" settings in the Web page, make sure these settings are correct. If [CABLE DISCONNECTED] appears on the bottom line, see "CONNECTION ERROR" on page 159. SERVER NOT FOUND/ See "CONNECTION ERROR" on page 159. CABLE DISCONNECTED SERVER NOT FOUND/ DHCP A Scan to E-mail transmission was not successful because the machine was unable to automatically obtain an IP address. Restart your router or other device that acts as your DHCP server. SERVER NOT FOUND/ SMTP A Scan to E-mail transmission was not successful because an incorrect host name is entered for your SMTP server. Check the SMTP server setting (p. 32). THERMISTOR ERROR If this message appears, unplug the power cord and then plug it back in. If the message still appears, call for service. 161
![](/manual_guide/products/sharp-fo-is125n-fois125n-operation-manual-63a2426/163.png)