Sharp LC-45GD6U LC-45GD6U Operation Manual - Page 19

Watching TV Cable TV/VCR connection (continued) A-2. Connecting with cable converter using AUX terminals for audio and video output. (If your cable TV converter has both RF OUTPUT and AUX terminals, it is recommended to connect it as shown in example A-1.) Coaxial Antenna Cable (commercially available) Video Cable (commercially available) RF Cable (Supplied) Coaxial Antenna Cable (commercially available) Audio Cable (commercially available) Coaxial Antenna Cable (commercially available) Signal splitter (commercially available) OUT IN Cable lead-in VIDEO AUDIO OUT IN VCR VIDEO AUDIO Cable TV converter NOTE • Be sure to remember what kind of connection is made with your TV. • Shown here is the preferred method of connecting a VCR and CATV Converter to your TV if you are in an area with good signal reception. This way you can view either TV programs or VCR tapes and not be concerned about the position of the VCR's TV/VCR switch and you can enjoy stereo tape playback from a stereo VCR. B. Connecting with Cable Converter without VCR Coaxial Antenna Cable (commercially available) Coaxial Antenna Cable (commercially available) Signal splitter (commercially OUT IN available) Cable TV converter (commercially available) Cable lead-in NOTE Coaxial Antenna Cable (commercially available) • Be sure to remember what kind of connection is made with your TV. • Switching between ANALOG-A and ANALOG-B is possible by pressing the A-ANALOG-B button on the remote control. • A good color picture depends on a good TV signal. So does good multi-channel sound. Ask your dealer for advice on how to install your outdoor antenna to receive the best possible signal. • If you subscribe to Cable TV or have a central antenna for your building, you may not need an outdoor antenna. 18