Sharp NP-PH3501QL Installation Manual - NEC - Page 110
Mounting the Optional Board (sold separately)
![]() |
View all Sharp NP-PH3501QL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
4. Projector Adjustment and Connecting 4-5-2. Mounting the Optional Board (sold separately) CAUTION • Before mounting or removing the optional board, check that the projector power switch and light power switch of the projector is turned off. Implement the connection with AC power shut off. Tool needed: Phillips screwdriver (plus-head) 1. Loosen the two screws on the SLOT cover of the LV unit. Remove the two screws and the SLOT cover. NOTE: • Keep the two screws and the slot cover. 2. Insert the optional board into the slot. Make sure that the board is inserted into the slot in the correct orientation. Incorrect orientation may cause miscommunication between the optional board and projector. 3. Tighten the two screws on both sides of the slot. • Be sure to tighten the screws. This will complete installation of the optional board. To select the optional board source, select SLOT as the input. 84
![](/manual_guide/products/sharp-npph3501ql-installation-manual-nec-4309891/110.png)