Sharp NP-PH3501QL Installation Manual - NEC - Page 126
Indicator Messages, POWER Indicator, STATUS Indicator
View all Sharp NP-PH3501QL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
7. Appendix 7-2. Indicator Messages This section helps you resolve problems you may encounter while setting up or using the projector. POWER Indicator Indicator display Off Flashing Green (short flashes) Green (twice per cycle) Green (long flashes) Orange (long flashes) Lit Green Orange Projector status Procedure Power is off. - Preparing to power up or cooling the main unit When the projector is in the standby state, the firmware is ready to be updated Wait a while. Firmware is ready to be updated - Off timer (enabled) - Program timer (off time enabled) Program timer (on time enabled) - Power on - Standby mode - STATUS Indicator Indicator display Off Flashing Green (short flashes) Green (long flashes) Orange Red Lit Green Orange Red Projector status No problem - Shutter is closed - Procedure Power on (The light mod- - ule is turned off.) Button has been pressed The projector's keys are locked. The setting must be canwhile projector is in key celed to operate the projector. lock mode Projector's ID number Check the control IDs. and remote control's ID number do not match Projector cooling Wait a while. Error occurring Contact your distributor or service personnel. Let us know the details displayed on the liquid crystal indicator panel then. Power on - Standby mode - Error requiring service Ask your distributor or service personnel for repair. Let us support know the details displayed on the liquid crystal indicator panel then. 100