Sharp NP-PH3501QL Installation Manual - NEC - Page 81
Setting a connection destination
![]() |
View all Sharp NP-PH3501QL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
2. Configuring the projector's initial settings 4. Setting a connection destination When the DCC is activated, the Projector Select screen is displayed. This screen is used to set the IP address or host name of the connection destination device. The connection destination devices that have been connected to are saved in a history, and the connection destination can be selected from this history. This screen can be displayed also by selecting "Select Projector... " from the tool bar. Multiple connection IP Address/Host "Add" button "Edit" button "Delete" button "History" button Projector Name Allows to set multiple connection destination devices. Without check: Set only 1 connection destination device. With check: Set multiple connection destination devices. When multiple destination devices are set, the currently connected device is located at the top of the connection list. Enter the network setting of the connection destination device. Select the IP address or the host name and enter the necessary items. Enter the IP address. • When entering an address from the connection history, double- click the IP address/Host field, then select the connection history displayed. Value set at factory shipment: 192.168.10.10 Displays the host name of the connection destination device. Adds a connection destination device. Sets the connection destination device. Deletes the connection destination device. Edits (or deletes) the information history of the connection destination device. Check that the IP address is set to the factory default of "192.168.10.10", then click the [OK] button. 55
![](/manual_guide/products/sharp-npph3501ql-installation-manual-nec-4309891/81.png)