Sharp NP-PH3501QL Installation Manual - NEC - Page 43
Removing and Mounting the Side Panel, 1-5-3. Removing and Mounting the Filter Cover
View all Sharp NP-PH3501QL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
1-5-2. Removing and Mounting the Side Panel Preparation: Phillips-head screwdriver (No.2), service key (attached goods) 1. Loosen the ten fixing screws on the side panel. Loosen four screws on the side panel until they are free to spin. The screws do not detach from the panel. 1. Before Setting Up Your Projector 2. Unlock the side panel. Unlock the cover using the service key. 3. Remove the side panel. The side panel is fixed in place by hooks at the bottom (in 2 locations). Tilt the side panel toward you and pull up to remove it. Do not use force when tilting the side panel. Hook (2 locations) This completes removing the side panel. To mount the side panel, perform the removal procedure in reverse. Make sure that you do not forget to tighten the screws or to lock the key lock. 1-5-3. Removing and Mounting the Filter Cover Refer to "6-3-1. Cleaning the Air Filter" (→ page 94) for details on how to remove and attach the filter cover. 17