Sharp NP-PH3501QL Installation Manual - NEC - Page 111
Turning off the Projector
![]() |
View all Sharp NP-PH3501QL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
4. Projector Adjustment and Connecting 4-6. Turning off the Projector To turn off the projector: 1. First, press the (POWER) button on the projector cabinet or the POWER OFF button on the remote control. The [POWER OFF / ARE YOU SURE ?] message will appear. 2. Secondly, press the ENTER button or press the (POWER) or the POWER OFF button again. When the projector is in STANDBY MODE, the POWER indicator lights up orange. • Before the POWER indicator lights up orange, the buzzer sound is released when [NOTIFICATION SETTING] for [BUZZER] is ON. Power On Standby Steady green light Press twice Steady orenge light 3. After the projector enters the standby state, turn off the projector power switch ([1]), then the light power switch ([2]). The POWER indicator will go off and the main power will turn off. • While the POWER indicator is blinking green in short cycles, the power cannot be turned off. Projector power switch ON OFF Light power switch ON OFF 4. Return the administrator switch to the OFF position, then remove the administrator key. Administrator key Administrator switch 5. Turn off the AC power to the projector. 85
![](/manual_guide/products/sharp-npph3501ql-installation-manual-nec-4309891/111.png)