Sharp NP-PH3501QL Installation Manual - NEC - Page 80
Connecting the computer to the projector and starting up the DCC, available LAN cable.
![]() |
View all Sharp NP-PH3501QL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
2. Configuring the projector's initial settings 2-2-3. Connecting the computer to the projector and starting up the DCC 1. Connect the computer on which the DCC is installed to the LAN port on the projector using a commercially available LAN cable. NOTE • The DCC cannot be connected to the HDBaseT port. 2. Set the projector to the standby mode. Follow the instructions at "4-2. Turning on the Projector" (→ page 70) and set the projector to the standby mode. 3. Start up the DCC. From the Windows [Start] menu, select [All Programs] → [Projector User Supportware] → [DCC]. The DCC starts up. TIP: • If the "Language Select" screen appears, select the display language. • To change the display language, click "Option" - "Language" from the toolbar. • If a Chinese font or Japanese font is not installed on your PC, then displaying Chinese or Japanese is not supported and the [ 中文] button or button is not displayed. • DCC supports "English", "Chinese (Simplified)", and "Japanese" for display. 54
![](/manual_guide/products/sharp-npph3501ql-installation-manual-nec-4309891/80.png)