Sharp NP-PH3501QL Installation Manual - NEC - Page 53
WARNING, J.S.T: J.S.T. Manufacturing Co. Ltd.
![]() |
View all Sharp NP-PH3501QL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
1. Before Setting Up Your Projector WARNING • The power supply unit handles large electrical currents. To maintain safety, use wires with the specifications as shown in the following table, and affix to the terminals at the designated attachment torque. • Always use solderless terminals with the dimensions as shown in the following diagram. • The use of parts with dimensions other than as designated creates a risk of the AC power supply unit short circuiting due to the terminal block generating heat and melting because the terminal block of the light power supply unit cannot be attached correctly. • Power supply terminal L, N (Black) AC power is provided to the projector power supply and the light power supply by a single cable. JIS IEC/EN UL CSA Thickness of compatible 14 mm2 wiring (using solderless terminal) 14 mm2 AWG6 or AWG8 AWG6 or AWG8 Solderless terminal dimen- M5 x 10 sions Tightening torque 2.0 to 2.5N·m Solderless terminal dimensions Min ⌀6.1 Max 12.2 Max 5.8 Unit: mm Solderless terminal recom- Model R8-5 mended part (J.S.T parts) J.S.T: J.S.T. Manufacturing Co. Ltd. Min 4.5 Min 1.0 -Max 2.0 Min 1.0 -Max 2.0 When using AWG6: Model R14-5 When using AWG8: Model R8-5 27
![](/manual_guide/products/sharp-npph3501ql-installation-manual-nec-4309891/53.png)