Sharp NP-PH3501QL Installation Manual - NEC - Page 84
Exiting the DCC
![]() |
View all Sharp NP-PH3501QL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
7. Check that all of the results are "OK". 2. Configuring the projector's initial settings If Different is displayed Return to step 1 and execute the update again. NOTE • When, after having mounted the LV unit, updating the projector for the purpose of version upgrade, instead of the projector's initial settings, set the projector's IP address to a connection destination, and execute from step 1 through step 7. The projector's IP address can be checked on the setting of WIRED LAN from the onscreen menu. • The update for the purpose of the initial settings must be done before mounting the LV unit. 2-2-5. Exiting the DCC 1. Click "File". The [File] menu will appear. 2. Click "Exit". The DCC will close. 3. Turning off the Projector Follow the procedure at "4-6 Turning off the Projector" (→ page 85) to turn off the projector's power, then disconnect the AC power. TIP: • To check the projector's information and log using the DCC, see "7-8.Using the DCC's functions" (→ page 118). 58
![](/manual_guide/products/sharp-npph3501ql-installation-manual-nec-4309891/84.png)