Sony CDX-MP30 Operating Instructions (English, Español, Fran&cc - Page 16

Storing only the desired stations You can manually preset the desired stations on any chosen number button. 1 Press (SOURCE) repeatedly to select the radio. 2 Press (MODE) repeatedly to select the band. 3 Turn the SEEK/AMS control dial to tune in the station that you want to store. 4 Press the desired number button ((1) to (6)) until "MEM" appears. The number button indication appears in the display. Note If you try to store another station on the same number button, the previously stored station will be erased. Receiving the stored stations 1 Press (SOURCE) repeatedly to select the radio. 2 Press (MODE) repeatedly to select the band. 3 Press the number button ((1) to (6)) on which the desired station is stored. If preset tuning does not work - Automatic tuning/Local Seek Mode Automatic tuning: Turn the SEEK/AMS control dial to search for the station. Scanning stops when the unit receives a station. Turn the SEEK/AMS control dial until the desired station is received. Local Seek Mode: If the automatic tuning stops too frequently, press (SENS/BTM) repeatedly until "LOCAL-ON" appears. "LCL" indicator is displayed. Only the stations with relatively strong signals will be tuned in. Tip If you know the frequency of the station you want to listen to, turn the SEEK/AMS control dial until the desired frequency appears (manual tuning). If FM stereo reception is poor - Monaural Mode During radio reception, press (SENS/BTM) repeatedly until "MONO-ON" appears. "MONO" indicator is displayed. The sound improves, but becomes monaural ("ST" disappears). To return to normal mode, select "MONOOFF." 16