Sony CDX-MP30 Operating Instructions (English, Español, Fran&cc - Page 23
Removing the unit, clip on the left side of the unit, then - install
View all Sony CDX-MP30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Replacing the lithium battery When the battery becomes weak, the range of the card remote commander becomes shorter. Replace the battery with a new CR2025 lithium battery. Use of any other battery may present a risk of fire or explosion. Removing the unit 1 Remove the front cover 1 Detach the front panel (page 9). 2 Press the clip inside the front cover with a thin screwdriver. x + side up 3 Repeat step 2 for the other side. 2 Remove the unit 1 Use a thin screwdriver to push in the clip on the left side of the unit, then pull out the left side of the unit until the catch clears the mounting. Notes on lithium battery •Keep the lithium battery out of the reach of children. Should the battery be swallowed, immediately consult a doctor. •Wipe the battery with a dry cloth to assure a good contact. •Be sure to observe the correct polarity when installing the battery. •Do not hold the battery with metallic tweezers, otherwise a short-circuit may occur. WARNING Battery may explode if mistreated. Do not recharge, disassemble, or dispose of in fire. 4 mm (3/16 in.) 2 Repeat step 1 for the right side. 3 Slide the unit out of its mounting. 23