Sony CDX-MP30 Operating Instructions (English, Español, Fran&cc - Page 17

Storing station names - Station Memo You can assign a name to each radio station and store it in memory. The name of the station currently tuned in appears in the display. You can assign a name using up to 8 characters for a station. Storing the station names 1 Tune in a station whose name you want to store. 2 Press (LIST) for 2 seconds. Name edit mode 3 Enter the characters. 1 Turn the VOL control dial to select the desired characters. (A y B y C y ··· Z y 0 y 1 y 2 y ··· 9 y + y - y * y/ y \ y > y < y . y _ y A ···) If you want to put a blank space between characters, select "_." 2 Press (SEL) after locating the desired character. The next character flashes. 3 Repeat steps 1 and 2 to enter the entire name. 4 Press (LIST) for 2 seconds. Tips • Simply overwrite or enter "_" to correct or erase a name. • If no memory is remaining, "Mem Full" appears in the display, and you cannot assign a station name. Erasing the station name 1 Press (SOURCE) repeatedly to select the radio. 2 Press (MODE) repeatedly to select the band. 3 Press (LIST) for 2 seconds. 4 Press (DSPL) for 2 seconds. 5 Turn the VOL control dial to select the disc name you want to erase. 6 Press (SEL) for 2 seconds. The name is erased. Repeat steps 5 and 6 if you want to erase other names. 7 Press (LIST) for 2 seconds. The unit returns to normal radio reception mode. Note If you have already erased all of the station names, "NO Data" appears in step 4. Tuning in a station through a list - List-up 1 During radio reception, press (LIST) momentarily. The frequency or the name assigned to the current station appears in the display. 2 Press (LIST) repeatedly until you find the desired station. If no name is assigned to the selected station, the frequency appears in the display. 3 Press (SEL) to tune in the desired station. 17