Sony DAV IS50 Operating Instructions - Page 65

Control for HDMI/External Audio Device 9 Press X/x to select the desired ID, then press . You can select any ID (A, B, or C). The confirmation display appears. 10 Press . Set the S-AIR sub unit to the same ID. Sound transmission is established as follows (example): S-AIR main unit ID A Other S-AIR main unit ID B ID A ID A ID B S-AIR sub unit S-AIR sub unit S-AIR sub unit Tip • To confirm the current ID, perform Steps 1 to 7 above. When you pair the S-AIR main unit with the S-AIR sub unit (page 66), [(PAIRING)] appears beside ID on the display for selecting ID. To set the ID of the surround amplifier Refer to the operating instructions of the surround amplifier. To set the ID of the S-AIR receiver Refer to the operating instructions of the S-AIR receiver. Note • It is easy to set the same ID for the S-AIR main unit and S-AIR sub unit to establish sound transmission. However, neighbors may also receive your system's sound if IDs are the same, or you may receive the sound from neighbors. To prevent this, you can identify the S-AIR main unit with a specific S-AIR sub unit by performing the pairing operation (page 66). Enjoying the system's sound in another room For the S-AIR receiver (not supplied) You can enjoy the system's sound by using the S-AIR receiver. The S-AIR receiver can be installed anywhere, regardless of the location of the S-AIR main unit, for enjoying the system's sound in another room. For details of the S-AIR receiver, refer to the operating instructions of the S-AIR receiver. 1 Set the ID of the S-AIR receiver to that of the S-AIR main unit. • To set the ID of the S-AIR main unit, see "To set the ID of the S-AIR main unit" (page 64). • To set the ID of the S-AIR receiver, refer to the operating instructions of the S-AIR receiver. Note • When you are using another S-AIR sub unit, such as a surround amplifier, do not change the ID of the S-AIR main unit. Set the ID of the S-AIR receiver to the same ID as the S-AIR main unit. • When you pair the S-AIR main unit and another S-AIR sub unit, such as a surround amplifier, by the pairing operation, you need to perform the pairing operation between the S-AIR main unit and the S-AIR receiver. For details, see "Identifying the S-AIR main unit with a specific S-AIR sub unit (Pairing operation)" (page 66). 2 Select the desired function on the S-AIR receiver. The function changes in the same sequence as you press FUNCTION (page 32). 3 Adjust the volume on the S-AIR receiver. Note • When the sound is other than 2 channel stereo, multi channel sound is downmixed to 2 channel. • The sound of the S-AIR receiver may be cut off by operation of the S-AIR main unit. • Sound source is same with both the system and S-AIR receiver. continued 65US