Sony DAV IS50 Operating Instructions - Page 77
Calibrating the Appropriate Settings Automatically, (AUTO CALIBRATION)
UPC - 027242730953
View all Sony DAV IS50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Advanced Settings and Adjustments Calibrating the Appropriate Settings Automatically (AUTO CALIBRATION) D.C.A.C. (Digital Cinema Auto Calibration) can set the appropriate surround sound automatically. Note • The system outputs a loud test sound when [AUTO CALIBRATION] starts. You cannot turn the volume down. Give consideration to children and neighbor. • Make sure that the headphones are not connected to the surround amplifier (not supplied). You cannot operate the following steps with the headphones connected. 1 Press FUNCTION repeatedly until "DVD" appears in the front panel display. 2 Press DISPLAY while the system is in stop mode. The Control Menu display appears on the TV screen. 3 Press X/x to select [SETUP], then press . The options for [SETUP] appear. 4 Press X/x to select [CUSTOM], then press . The Setup Display appears. 5 Press X/x to select [AUDIO SETUP], then press . The options for [AUDIO SETUP] appear. 6 Press X/x to select [AUTO CALIBRATION], then press . The options for [AUTO CALIBRATION] appear. 7 Connect the calibration microphone (supplied) to the ECM-AC2 jack on the rear of the control unit. Set up the calibration microphone at the ear level using the tripod, etc. (not supplied). The front of each speaker should face the calibration microphone, and there should be no obstruction between the speakers and the calibration microphone. Note • The ECM-AC2 jack is used for the supplied calibration microphone only. Do not connect other microphones. Rear of the control unit DMPORT To ECM-AC2 jack Calibration microphone 8 Press C/c to select [YES]. 9 Press . [AUTO CALIBRATION] starts. Be quiet during the measurement. continued 77US