Sony DAV IS50 Operating Instructions - Page 66
For the S-AIR receiver not supplied, For the surround amplifier not supplied - - 5 1 ch
UPC - 027242730953
View all Sony DAV IS50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
To control the system from the S-AIR receiver You can control the system from the S-AIR receiver by using the following buttons. Press H, X, x, ./> S-AIR CH Operation Share the same operations on the remote and control unit. Change the function of the system. For details, refer to the operating instructions of the S-AIR receiver. Enjoying the S-AIR receiver while the S-AIR main unit is in standby mode For the S-AIR receiver (not supplied) You can enjoy the S-AIR receiver while the S-AIR main unit is in standby mode by setting "S-AIR STBY" to "ON". 1 Press SYSTEM MENU. 2 Press X/x repeatedly until "S-AIR STBY" appears in the front panel display, then press or c. 3 Press X/x to select the desired setting. • "ON": You can enjoy the S-AIR receiver while the S-AIR main unit is in standby mode or turned on. • "OFF": You cannot enjoy the S-AIR receiver while the S-AIR main unit is in standby mode. 4 Press . The setting is made. 5 Press SYSTEM MENU. The system menu turns off. Note • When you set "S-AIR STBY" to "ON," the power consumption during the standby mode increases. • When you turn the system off while "S-AIR STBY" is set to "ON," "S-AIR" flashes (when sound transmission between the S-AIR main unit and S-AIR receiver is not established), or lights up (when sound transmission between the S-AIR main unit and S-AIR receiver is established) in the front panel display. • When the wireless transmitter is not inserted in the S-AIR main unit, you cannot set "S-AIR STBY". • "S-AIR STBY" is set to "OFF" automatically when the wireless transmitter is removed from the S-AIR main unit. • When you turn the system off while "S-AIR STBY" is set to "ON", you cannot use any buttons other than [/1 button. Tip • When there is no disc in the S-AIR main unit and "S-AIR" lights up in the front panel display, you can load a disc into the S-AIR main unit and enjoy music by the S-AIR receiver. Identifying the S-AIR main unit with a specific S-AIR sub unit (Pairing operation) For the surround amplifier (not supplied) For the S-AIR receiver (not supplied) It is easy to set the same ID for the S-AIR main unit and an S-AIR sub unit, such as a surround amplifier or S-AIR receiver, to establish sound transmission. However, neighbors may also receive your system's sound if IDs are the same, or you may receive the sound from neighbors. To prevent this, you can identify the S-AIR main unit with a specific S-AIR sub unit by performing the pairing operation. 66US