Sony DAV IS50 Operating Instructions - Page 78
Press, to select [YES] or [NO], then, The measurement is OK., About error messages for
UPC - 027242730953
View all Sony DAV IS50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Note • Avoid being in the measurement area and making noise during the measurement (about 1 minute), to avoid measurement failure. During the measurement, test signals are output from the speakers. • The environment of the room in which the system is installed may affect measurements. • If an error message appears on the TV screen, follow the message, then select [YES]. An error message appears when: - the headphones are connected to the surround amplifier (not supplied). - the calibration microphone is not connected. - front speakers are not correctly connected. - surround speakers are not correctly connected. - front and surround speakers are not correctly connected. - subwoofer is not connected. 10 Press C/c to select [YES] or [NO], then press . x The measurement is OK. Disconnect the calibration microphone, then select [YES]. The result is implemented. x The measurement is not OK. Follow the message, then select [YES] to retry. Note • While the Auto Calibration function works: - do not turn off the power. - do not press any button. - do not change the volume. - do not change the function. - do not insert or eject a disc. - do not connect the headphones to the surround amplifier (not supplied). - do not disconnect the calibration microphone. Tip • You can check the distance between the listening position and each speaker. See page 85. About error messages for the auto calibration If the following message appears during [AUTO CALIBRATION], check "Symptoms and remedies" and retry the auto calibration. Error message Symptoms and remedies [Check calibration mic connection.] No channel sound can be detected. Check that the calibration microphone is connected properly. If the calibration microphone is connected properly, the calibration microphone or calibration microphone cord may be damaged. [Mic input level The calibration microphone or overloaded.] system may be damaged. Contact your Sony dealer or local authorized Sony service facility. [Check front speaker connection.] Front speakers are not connected. Check that the front speakers are connected properly (page 19). [Check surround speaker connection.] Only one surround speaker is connected. Check that the surround speakers are connected properly (page 19). [Check front and surround speaker connection.] Front speakers are not connected and only one surround speaker is connected. Check that the speakers are connected properly (page 19). [Check subwoofer connection.] Contact your Sony dealer or local authorized Sony service facility. 78US