Sony DAV IS50 Operating Instructions - Page 68
If sound transmission is, unstable, When you set RF CHANGE to OFF
UPC - 027242730953
View all Sony DAV IS50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
x For the S-AIR receiver Refer to the operating instructions of the S-AIR receiver. When sound transmission is established, the confirmation display appears. Note • Perform the pairing within several minutes after step 10. If you do not, the pairing is canceled automatically and the confirmation display appears. To perform pairing, select [YES]. To return to the previous display, select [NO]. 12 Press C/c to select the next operation. x To finish pairing Select [NO], then press . x To perform pairing of another S-AIR sub unit Select [YES], then press . Note • If you perform the pairing operation between the S-AIR main unit and another S-AIR sub unit (page 66), sound transmission established by ID is canceled. • When you perform pairing, [(PAIRING)] appears beside ID on the display for selecting ID. To cancel pairing Perform the ID setting of the S-AIR main unit according to the procedure of "To set the ID of the S-AIR main unit" (page 64). If you select a new ID (you can select the same ID as before), pairing is canceled. If sound transmission is unstable For the surround amplifier (not supplied) For the S-AIR receiver (not supplied) If you use multiple wireless systems which sharing the 2.4 GHz band, such as wireless LAN or Bluetooth, the transmission of S-AIR products or other wireless systems may be unstable. In this case, the transmission may be improved by changing the following "RF CHANGE" setting. 1 Press SYSTEM MENU. 2 Press X/x repeatedly until "RF CHANGE" appears in the front panel display, then press or c. 3 Press X/x to select the desired setting. • "AUTO": Normally select this. The system change "RF CHANGE" to "ON" or "OFF" automatically. • "ON": The system transmits sound by searching the better channel for transmitting. • "OFF": The system transmits sound by fixing the channel for transmitting. 4 Press . The setting is made. 5 Press SYSTEM MENU. The system menu turns off. 6 When you set "RF CHANGE" to "OFF," select the ID so that sound transmission is most stabilized (page 64). Note • When the wireless transmitter is not inserted in the S-AIR main unit, you cannot set "RF CHANGE". • In most cases, you will not need to change this setting. • If "RF CHANGE" is set to "OFF," transmission between the S-AIR main unit and S-AIR sub unit can be performed using one of the following channels. - S-AIR ID A: equivalent channel for Wi-Fi channel 1 - S-AIR ID B: equivalent channel for Wi-Fi channel 6 - S-AIR ID C: equivalent channel for Wi-Fi channel 11 • The transmission may be improved by changing the transmission channel (frequency) of the other wireless system(s). For details, refer to the operating instructions of the other wireless system(s). 68US