Sony DAV IS50 Operating Instructions - Page 83
Settings for the Audio, [AUDIO SETUP]
UPC - 027242730953
View all Sony DAV IS50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Advanced Settings and Adjustments x [AUDIO (HDMI)] You can select the audio output status from the HDMI OUT jack. [OFF] [ON] The system does not output the sound from the HDMI OUT jack. The system outputs audio signals by converting Dolby Digital, DTS, or 96 kHz/24 bit PCM signals to 48 kHz/16 bit PCM. Note • When you connect the control unit and TV with an HDMI cable and [ON] is selected, [AUDIO DRC], "A/V SYNC", TONE, "DEC. MODE", and sound mode are not applied to the sound that is output from the TV. • When you set the function to other than "DVD", the system does not output the sound from the HDMI OUT jack even if you set [AUDIO (HDMI)] to [ON]. x [JPEG RESOLUTION] You can select the resolution of JPEG image files output from the HDMI OUT jack. [SD ] [HD ] [HD] [(1920×1080i)HD [(1920×1080i)HD] The system outputs standard resolution with a black frame. The system outputs HD resolution with a black frame. The system outputs the HD resolution without a black frame. ] The system outputs full size HD resolution with a black frame. The system outputs full size HD resolution without a black frame. Note • [JPEG RESOLUTION] is effective only when you set [TV TYPE] in [VIDEO SETUP] to [16:9], and you set [HDMI RESOLUTION] in [HDMI SETUP] to other than [720×480p]. • You can select [(1920×1080i)HD ] or [(1920×1080i)HD] only when you set [HDMI RESOLUTION] in [HDMI SETUP] to [1920×1080i]. • If you select [(1920×1080i)HD ] or [(1920×1080i)HD], next image appears after black screen. • HDMI signal will stop momentarily when the system is loading or unloading a DATA CD or DATA DVD disc. Settings for the Audio [AUDIO SETUP] AUDIO SETUP S-AIR SETUP: AUTO CALIBRATION: DIGITAL IN: TV OPT, SAT/CABLE AUDIO DRC: TRACK SELECTION: COAX OFF OFF x [S-AIR SETUP] You can set up the S-AIR setting. For details, see "Using an S-AIR Product" (page 63). [ID] [PAIRING] You can set the ID of the S-AIR main unit. You can pair the system and S-AIR sub unit, such as surround amplifier or S-AIR receiver. Note • This function is available only when the S-AIR transmitter (not supplied) is inserted into the S-AIR main unit. x [AUTO CALIBRATION] You can calibrate the appropriate settings automatically. For details, see "Calibrating the Appropriate Settings Automatically" (page 77). continued 83US