Sony DCR-IP5 Operating Instructions - Page 136

To stop or end copying, When the, Memory Stick, is full, When the access lamp is lit or flashing

Page 136 highlights

Copying still images from a tape - Photo save To stop or end copying Select END, then press the center z on the control button in step 5. When the "Memory Stick" is full "MEMORY FULL" appears on the screen, and the copying stops. Select END, then press the center z on the control button, insert another "Memory Stick" and repeat the procedure from step 2. When the access lamp is lit or flashing Do not shake or strike your camcorder. Also, do not turn the power off, eject the "Memory Stick" or remove the battery pack. Otherwise, the image data may be corrupted. If the write-protect switch on the "Memory Stick" is set to LOCK "NOT READY" appears when you select the item in the menu settings. When you change the "Memory Stick" in the middle of copying Your camcorder resumes copying from the last image recorded on the previous "Memory Stick." Note The message "NOT READY" appears when you select PHOTO SAVE in the following cases: •There are no images recorded on the tape. •Images are recorded before the current position on the tape. In such cases, do the tape photo recording first, or rewind the tape, then select PHOTO SAVE. 136

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196

136
Copying still images from a tape
Photo save
To stop or end copying
Select
END, then press the center
z
on the control button in step 5.
When the
Memory Stick
is full
MEMORY FULL
appears on the screen, and the copying stops. Select
END, then
press the center
z
on the control button, insert another
Memory Stick
and repeat the
procedure from step 2.
When the access lamp is lit or flashing
Do not shake or strike your camcorder. Also, do not turn the power off, eject the
Memory Stick
or remove the battery pack. Otherwise, the image data may be
corrupted.
If the write-protect switch on the
Memory Stick
is set to LOCK
NOT READY
appears when you select the item in the menu settings.
When you change the
Memory Stick
in the middle of copying
Your camcorder resumes copying from the last image recorded on the previous
Memory Stick.
Note
The message
NOT READY
appears when you select PHOTO SAVE in the following
cases:
There are no images recorded on the tape.
Images are recorded before the current position on the tape.
In such cases, do the tape photo recording first, or rewind the tape, then select PHOTO
SAVE.