Sony DCR-IP5 Operating Instructions - Page 181
Removing dust from inside the viewfinder, Charging the built-in rechargeable battery
UPC - 027242597945
View all Sony DCR-IP5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 181 highlights
Maintenance information and precautions Cleaning the LCD screen If fingerprints or dust make the LCD screen dirty, we recommend using an LCD Cleaning Kit (optional) to clean the LCD screen. Removing dust from inside the viewfinder (1) Pull out the viewfinder in the direction of the arrow 1. Remove the two screws in the direction of the arrow 2 with a screwdriver (optional). Remove the eyecup in the direction of the arrow while pressing the projection 3. 1 3 2 2 (2) Remove dust from inside the eyecup and viewfinder with a commercially available blower. (3) In reverse, starting from 3, attach the eyecup. Then replace the screws in the direction of the arrow 2. Caution Do not remove any other screws. You may remove only the screws necessary to remove the eyecup. Notes •Do not drop or bend the eyecup shaft. •Be careful when handling the eyecup. Charging the built-in rechargeable battery Your camcorder is supplied with a built-in rechargeable battery installed so as to retain the date and time, etc., regardless of the setting of the POWER switch. The built-in rechargeable battery is always charged as long as you are using your camcorder. The battery, however, will get discharged gradually if you do not use your camcorder. It will be completely discharged in about 3 months if you do not use your camcorder at all. Even if the built-in rechargeable battery is not charged, it will not affect the camcorder operation. To retain the date and time, etc., charge the battery if the battery is discharged. Additional Information 181