Sony DCR-IP5 Operating Instructions - Page 167

Types of trouble and their solutions When operating using a "Memory Stick" - DCR-IP7BT only Symptom Cause and/or Corrective Actions The "Memory Stick" does not function. • The POWER switch is not set to MEMORY. c Set it to MEMORY (p. 118). • The "Memory Stick" is not inserted. c Insert a "Memory Stick" (p. 110). Recording does not function. • The "Memory Stick" has already been recorded to its full capacity. c Delete unnecessary images and record again (p. 150). • An incorrectly formatted "Memory Stick" is inserted. c Format the "Memory Stick" using your camcorder or use another "Memory Stick" (p. 105). • The write-protect switch on the "Memory Stick" is set to LOCK. c Release the lock (p. 108). The image cannot be deleted. • The image is protected. c Cancel image protection (p. 149). • The write-protect switch on the "Memory Stick" is set to LOCK. c Release the lock (p. 108). You cannot format the "Memory Stick." • The write-protect switch on the "Memory Stick" is set to LOCK. c Release the lock (p. 108). Deleting all the images cannot be carried out. • The write-protect switch on the "Memory Stick" is set to LOCK. c Release the lock (p. 108). You cannot protect an image. • The write-protect switch on the "Memory Stick" is set to LOCK. c Release the lock (p. 108). • The INDEX screen is not displayed. c The protect marks cannot be written when the single screen is displayed (p. 149). You cannot write a print mark on a still image. • The write-protect switch on the "Memory Stick" is set to LOCK. c Release the lock (p. 108). • The INDEX screen is not displayed. c The print marks cannot be written when the single screen is displayed (p. 154). • You are trying to write a print mark on a moving picture. c Print marks cannot be written to a moving picture. Troubleshooting (continued on the following page) 167