Sony DCR-IP5 Operating Instructions - Page 30
Adjusting the angle of the LCD screen, Recording a picture
UPC - 027242597945
View all Sony DCR-IP5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Recording a picture Note Do not touch the built-in microphone during recording. To enable unbroken transition Transition between the last scene you recorded and the next scene is unbroken as long as you do not eject the cassette, even if you turn off your camcorder. However, check the following: - When you change the battery pack, set the POWER switch to OFF (CHG). If you leave your camcorder in standby mode for 5 minutes while a cassette is inserted Your camcorder automatically turns off. This is to save battery power and to prevent battery and tape wear. To resume the standby mode, set the POWER switch to OFF (CHG), and to CAMERA again. However, your camcorder does not turn off automatically when a cassette is not inserted. Recording data The recording data (date/time or various settings when recorded) are not displayed during recording. However, they are recorded automatically onto the tape. To display the recording data, press DATA CODE on the Remote Commander during playback. You can also use DATA CODE on the PAGE3 screen for this operation. (p. 41). The usable battery time when you record using the LCD screen The battery time is slightly shorter than the shooting time using the viewfinder. While the STBY indicator is flashing When you press START/STOP, the camcorder returns to standby. (The recording was not carried out.) While the REC indicator is flashing The START/STOP button does not work. Wait until the camcorder returns to standby. (The recording is being carried out while the REC indicator is flashing.) Adjusting the angle of the LCD screen The LCD panel can be rotated as illustrated below. 180° 90° OPEN When you want to close the LCD panel, set it horizontally, then swing it into the 30 camcorder body.