Sony DCR-TRV70 Operating Instructions - Page 119
Recording a superimposed image on a tape
View all Sony DCR-TRV70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
"Memory Stick" Operations Superimposing a still image in the "Memory Stick" on an image - MEMORY MIX Notes •You cannot use MEMORY MIX for moving pictures recorded on a "Memory Stick." •When the overlapping still image has a large amount of white, the thumbnail image of the picture may not be clear. •When you use MEMORY MIX in the mirror mode (p. 29), the picture on the LCD screen appears normally without being mirror-reversed. Image data modified with your computer You may not be able to play back the images modified with your computer on your camcorder. The "Memory Stick" supplied with your camcorder stores 20 images: - For M. CHROM: 18 images (such as a frame) 101-0001~101-0018 - For C. CHROM: two images (such as a background) 101-0019~101-0020 Sample images Sample images stored in the "Memory Stick" supplied with your camcorder are protected (p. 137). Recording a superimposed image on a tape Before operation •Insert the "Memory Stick" containing still images into your camcorder. •Insert a tape for recording into your camcorder. The POWER switch should be set to . Operate by touching the panel. (1) Press FN and select PAGE2. (2) Press MEM MIX. The image recorded on the "Memory Stick" appears on the right lower part of the screen. (3) Press - (to see the previous image)/+ (to see the next image) on the right lower corner of the screen to select the still image that you want to superimpose. (4) Press a desired mode. The still image is superimposed on the moving picture during recording standby. 2 MEM M I X MEM MIX OFF MCCAM OVER- OK LUMI LAP CAMCM MCCAM CHROM CHROM 101 101-0001 -+ Still image 4 MEM MIX OFF M. LUMI -+ OK 101 101-0001 -+ (continued on the following page) 119