Sony DCR-TRV70 Operating Instructions - Page 40
To display the screen indicators – Display function, Data code, Date/time, Various settings, DISPLAY
View all Sony DCR-TRV70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Playing back a tape To display the screen indicators - Display function Press DISPLAY/BATT INFO on your camcorder or DISPLAY on the Remote Commander supplied with your camcorder. The indicators disappear from the screen. To make the indicators appear, press DISPLAY/BATT INFO or DISPLAY on the Remote Commander again. DISPLAY DATA CODE DISPLAY/ BATT INFO About date/time and various settings Your camcorder automatically records not only images on the tape but also the recording data (date/time or various settings when recorded) (Data code). Follow the steps below to display the data code using the touch panel or the Remote Commander. Using the touch panel (1) Set the POWER switch to VCR, then play back the tape. (2) During playback, press FN and select PAGE2. (3) Press DATA CODE. (4) Select CAM DATA or DATE DATA, then press OK. (5) Press EXIT. Date/time 50min 0:00:23:01 JUL 4 2003 12:05:56 PM Various settings 50min 0:00:23:01 [a] [b] [c] AUTO [d] 6 0 AWB F1.8 9 dB [e] [f] [g] [a] Time code/Tape counter [b] SteadyShot off [c] Exposure [d] White balance [e] Gain [f] Shutter speed [g] Aperture value 40