Sony DCR-TRV70 Operating Instructions - Page 184
Symptom, Cause and/or Corrective Actions, Set STEADYSHOT
View all Sony DCR-TRV70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 184 highlights
Types of trouble and how to correct trouble Symptom Cause and/or Corrective Actions A vertical band appears when you shoot a very bright subject. • This is not a malfunction. Some tiny spots in white, red, blue or • SLOW SHTR, Super NightShot or Color Slow Shutter is green appear on the screen. activated. This is not a malfunction. An unknown picture appears on the screen. • If about 10 minutes elapse after you set the POWER switch to CAMERA or DEMO MODE is set to ON in the menu settings without a cassette or a "Memory Stick" inserted, your camcorder automatically starts the demonstration. c Insert a cassette or a "Memory Stick" or press the LCD screen. The demonstration stops. You can also set DEMO MODE to OFF in the menu settings (p. 180). The picture is recorded in incorrect or • NIGHTSHOT is slid to ON. unnatural colors. c Slide it to OFF (p. 34). Picture appears too bright, and the subject does not appear on the screen. • NIGHTSHOT is slid to ON in a bright place. c Slide it to OFF (p. 34). • The back light function is active. c Set it off (p. 34). The click of the shutter does not sound. • BEEP in is set to OFF in the menu settings. c Set it to MELODY or NORMAL (p. 181). Black bands appear when you record a TV screen or computer screen. c Set STEADYSHOT in (p. 174). to OFF in the menu settings An external flash (optional) does not work. • The power of the external flash (optional) is off or the power source is not installed. c Turn on the external flash (optional) or install the power source. • Two or more external flashes (optional) are attached. c Only one external flash (optional) can be attached. Flickering or changes in color occurs. • These phenomena appear if you are recording in the soft portrait or sports lesson mode of PROGRAM AE under a discharge tube such as a fluorescent lamp, sodium lamp or mercury lamp. This is not a malfunction. c Set PROGRAM AE to AUTO in the menu settings. 184