Sony DCR-TRV70 Operating Instructions - Page 39
Playback – Basics, Playing back a tape - remote control
View all Sony DCR-TRV70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
- Playback - Basics - Playing back a tape You can monitor the recorded tape on the LCD screen. If you close the LCD panel, you can monitor the playback picture in the viewfinder. You can also control playback using the Remote Commander supplied with your camcorder. (1) Set the POWER switch to VCR while pressing the small green button. (2) Press OPEN to open the LCD panel. (3) Press to rewind the tape. (4) Press to start playback. (5) Adjust the volume following the steps below. 1 Press FN to display PAGE1. 2 Press VOL. The screen to adjust the volume appears. 3 Press - (to turn down the volume)/+ (to turn up the volume). 4 Press OK to return to PAGE1. 3 4 1 POWER VCR OFF(CHG) CAMERA MEMORY/ NETWORK Playback - Basics 5 OK - VOL + 2 The bar indicator To return to FN Press EXIT. To stop playback Press in the stop state. To rewind the tape Press in the stop state. To fastforward the tape Press in the stop state. To view a still image (playback pause) Press during playback. To resume playback, press again. When playback pause lasts for about five minutes, your camcorder automatically enters the stop state. If you leave the power on for a long time Your camcorder gets warm. This is not a malfunction. 39