Sony DCR-TRV70 Operating Instructions - Page 120

Superimposing a still image in the Memory Stick on an image, MEMORY MIX

Page 120 highlights

Superimposing a still image in the "Memory Stick" on an image - MEMORY MIX (5) Press -/+ on the left lower corner of the screen to adjust the effect, then press OK to return to PAGE2. C. CHROM - The color (blue) scheme of the area in the moving image which is to be swapped with a still picture M. LUMI - The color (bright) scheme of the area in the still image which is to be swapped with a moving picture M. CHROM - The color (blue) scheme of the area in the still image which is to be swapped with a moving picture M. OVERLAP - No adjustment necessary You can use M.OVERLAP only when the POWER switch is set to CAMERA. (6) Press EXIT to return to FN. (7) Press START/STOP to start recording. To change the still image to be superimposed Press -/+ on the right lower corner before Step 5. To cancel MEMORY MIX Press OFF to return to PAGE2. Note In Step 4, you cannot reselect the mode. Press OFF to return to PAGE2. When you select M. OVERLAP You cannot change the still image or the mode. During recording You cannot change the mode. To record still images as-is to the tape Press -/+ on the left lower corner of the screen in the M. LUMI mode and keep going until the bar display on the right is full. Recording a superimposed image on a "Memory Stick" as a still image Before operation Insert the "Memory Stick" containing still images into your camcorder. Image size of still images is automatically set to 640 × 480. 120 The POWER switch should be set to . Operate by touching the panel. (1) Follow Step 1 to 6 on pages 119, 120. (2) Press PHOTO deeply to start recording. Recording is complete when the bar scroll indicator disappears. The image displayed on the screen when you press PHOTO deeply is recorded on the "Memory Stick." To cancel MEMORY MIX Press OFF to return to PAGE2.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220

120
Superimposing a still image in the “Memory Stick” on an image
– MEMORY MIX
(
5
)
Press –/+ on the left lower corner of the screen to adjust the effect, then press
OK to return to PAGE2.
C. CHROM
– The color (blue) scheme of the area in the moving image
which is to be swapped with a still picture
M. LUMI
– The color (bright) scheme of the area in the still image which
is to be swapped with a moving picture
M. CHROM
– The color (blue) scheme of the area in the still image which is
to be swapped with a moving picture
M. OVERLAP
– No adjustment necessary
You can use M.OVERLAP only when the POWER switch is
set to CAMERA.
(
6
)
Press EXIT to return to FN.
(
7
)
Press START/STOP to start recording.
To change the still image to be superimposed
Press –/+ on the right lower corner before Step 5.
To cancel MEMORY MIX
Press
OFF to return to PAGE2.
Note
In Step 4, you cannot reselect the mode. Press
OFF to return to PAGE2.
When you select M. OVERLAP
You cannot change the still image or the mode.
During recording
You cannot change the mode.
To record still images as-is to the tape
Press –/+ on the left lower corner of the screen in the M. LUMI mode and keep going
until the bar display on the right is full.
Recording a superimposed image on a “Memory Stick” as a still
image
Before operation
Insert the “Memory Stick” containing still images into your camcorder.
Image size of still images is automatically set to 640
×
480.
The POWER switch should be set to
.
Operate by touching the panel.
(
1
)
Follow Step 1 to 6 on pages 119, 120.
(
2
)
Press PHOTO deeply to start recording.
Recording is complete when the bar scroll indicator disappears. The image
displayed on the screen when you press PHOTO deeply is recorded on the
“Memory Stick.”
To cancel MEMORY MIX
Press
OFF to return to PAGE2.