Sony SNC-DF40N User Guide - Page 33

Note The selected frame rate and bit rate are a tentative value. The actual frame rate and bit rate may be different according to the image size, the shooting scene or the network condition. I-picture interval Set the I-picture inserting interval of MPEG4. I-picture is the compression data serving the basic point when the data compressed by MPEG4 is depressed. In the condition that errors tends to occur, such as the network environment variation, the distortion of the image is reduced by selecting a small value. The selectable values are 1, 2, 3, 4 and 5 seconds. Auto rate control This function adjusts the frame rate and the bit rate automatically so that the camera plays a smooth image to suit the connected computer environment. If On is selected, the rate of MPEG4 image is automatically adjusted. Note The maximum transmission rate will be the values set in Frame rate and Bit rate. OK/Cancel See "Buttons common to every setting menu" on page 26. JPEG Tab SNC-DF40N: 5, 6, 8, 10, 15, 20, 25, 30 fps SNC-DF40P: 5, 6, 8, 10, 15, 20, 25 fps "fps" is a unit indicating the number of frames transmitted per second. Image quality Set the quality of JPEG image. Selectable values are from Level 1 to Level 5. Selecting level 5 gives the image with the highest sharpness. Bandwidth control When the video mode is set to JPEG, the network bandwidth can be limited. Selectable bandwidths are 0.5, 0.6, 0.7, 0.8, 0.9, 1.0, 2.0, 3.0, 4.0, and Unlimited Mbps. When you do not wish to limit the bandwidth, select Unlimited. OK/Cancel See "Buttons common to every setting menu" on page 26. Reset Tab Administrating the Camera Reset camera menu Click Reset, and the message "Camera menu setting is reset to default. Are you sure?" is displayed. To reset to default, click OK. Frame rate Set the maximum frame rate of JPEG image that can be monitored on the computer. The selectable frame rates are the following: 33 Setting the Camera Image and Audio - Camera setting Menu