Sony SNC-DF40N User Guide - Page 52

Note The value of Recording capacity differs depending on Image size, Bit rate (for MPEG4) and Image quality (for JPEG) in the camera setting menu. OK/Cancel See "Buttons common to every setting menu" on page 26. Setting the Motion Detection Function - Motion detection setting Menu When you click Motion detection on the Administrator menu, the Motion detection setting menu appears. You can set the conditions to activate the built-in motion detection function in this menu. This is the same menu with the setting menu which is displayed when you click Motion detection in Alarm sending of e-Mail (SMTP) setting menu, Alarm sending of FTP client setting menu, Alarm recording of Image memory setting menu and so on. Notes • The motion detection function can activate or be set only when the Video mode of the camera is set to MPEG4 and the Cropping is set Off. • Before actual use, perform an operation test and confirm that the Motion detection function works correctly. Administrating the Camera Monitor display You can monitor the moving image and sets the detection window. Window 1 to 4 check box When you check this box, the specified Window is displayed on the monitor display. Threshold slider bar Set the Threshold level so as to judge whether there has been any motion in the camera image or not. You can change the Threshold level displayed in the Motion detection indicator. 52 Setting the Motion Detection Function - Motion detection setting Menu